Shot Filler for 32s

Discuss your gear and stitching and shoe modification in here.
User avatar
David Morawski
BSOS Beast
Posts: 403
Joined: 02 Aug 2005 07:11
Location: LA < CA < US

Shot Filler for 32s

Post by David Morawski »

I'm planning to order some shot and I was straying from steel, because I believe lead is heavier...however, I am going to get either copper or nickel plated lead shot. I was wondering if anyone had any experience with either type of shot, in regards to rust or grey colored water. I would imagine you wouldn't get the grey water from washing if it was a plated shot, but since this is just a guess I thought it'd be a good idea to gather the general consensus.

Also, what number do you guys use (ie. #4, #5, #6, etc)? I want smaller than BBs, and to be honest..as close to Abshire filler as I can get. I love those tiny little shot pellets :)

From looking at the pellets/oz. on Ballistic Products' website [http://shop2.mailordercentral.com/bpicart/] I'm leaning towards the idea that they weigh about the same, but nickel is more expensive.

Any words of wisdom on filler, in general, would be a great help.
Invictus.
Footblog // Challenges
RawSko
Green Footbag Ninja
Posts: 1386
Joined: 21 Nov 2005 16:44
Location: Winnipeg, Manitoba

Post by RawSko »

A friend of mine told me that BB's are exactly that. Copper plated lead... I didn't know that

My oppinion:
#7 shot is too small. It bleeds out unless you completely eliminate any trace of a bleed hole...

#4 is too big.

You're right about steel. It's too light.



The same friend that told me that thing about BB's is looking into this type of shot called Bizmuth. He says that it's exactly the same density as lead, but it's not toxic. He said something about it being filltered out of the trash-rock that comes out of mines... :? I don't really know anything about this stuff, but once I get some I'll let everyone know how it works.

Hope I've helped, at least a lil
Keep it real
Ben Roscoe
User avatar
David Morawski
BSOS Beast
Posts: 403
Joined: 02 Aug 2005 07:11
Location: LA < CA < US

Post by David Morawski »

I was under the impression that the number got larger with the size of the pellet...but now I just don't know.

I was looking at bismuth...=ridiculously expensive.Check it.

Thanks for the input; much appreciated

EDIT: You're definitely on point about the sizes..Sorry for casting doubt :)
Invictus.
Footblog // Challenges
User avatar
Nathan
Egyptian Footgod
Posts: 1285
Joined: 13 Jan 2005 18:29
Location: Penn State

Post by Nathan »

The higher number means smaller size. With good bleed holes, size 7 and 8 is perfect for me.
User avatar
SandWraith
Egyptian Footgod
Posts: 1272
Joined: 05 Apr 2005 20:39
Location: Marshfield, Wisconsin

Post by SandWraith »

Does washing a bag filled with lead produce any effects? I'm not concerned with lead poisoning-- more along the lines or rust-type damage to the bag.
Zach Marine - Member of the Tendonitis Club!
blog
User avatar
David Morawski
BSOS Beast
Posts: 403
Joined: 02 Aug 2005 07:11
Location: LA < CA < US

Post by David Morawski »

I only believe this from word of mouth, though it makes sense, but many people have complained about "grey water" when the bag gets wet. I don't think this is a problem if the lead is plated, however.
Invictus.
Footblog // Challenges
User avatar
skimhumboldt?
Shredalicious
Posts: 105
Joined: 07 Nov 2004 20:04
Location: mckinleyville, CA

Post by skimhumboldt? »

I use lead shot(7 1/2), and for all the skeptics out there: It does NOT produce grey water. the only thing that gets slighty grey is the panels on the inside, if you were to disect your bag after about two months of play. As far as getting lead poisining, The only people who really, frquently get it are underground miners and such, so unless you eat the stuff, theres like a 1 in 6 trillion chance you would get it.
Isaac Williams
PM me if you want to trade 32s
RawSko
Green Footbag Ninja
Posts: 1386
Joined: 21 Nov 2005 16:44
Location: Winnipeg, Manitoba

Post by RawSko »

davey M. wrote:I was looking at bismuth...=ridiculously expensive.Check it.
hah, ya... I didn't know that's how expensive it is normally, but this guy's go connections. that's what he said anyway... hah

I can't wait to try that stuff!
Ben Roscoe
User avatar
Chim-Chim
Egyptian Footgod
Posts: 1015
Joined: 05 Jul 2005 07:30
Location: Chicago

Post by Chim-Chim »

the soap can get greyish or blueish, but the water will run clear when the soap is all gone
Jake Raye
User avatar
shredzilla
Post Master General
Posts: 3260
Joined: 14 Oct 2005 06:24
Location: Paradise Lost
Contact:

Post by shredzilla »

:P Drool...
Image
J. Chris "Thread-killer" Miller
LittleBoy footbag
Official Streaker
Posts: 1013
Joined: 16 Nov 2004 18:04
Location: Kendall Park, NJ

Post by LittleBoy footbag »

hey would copper plated lead shot size 7 be just as big or bigger than plain old lead shot size 7?
User avatar
ShredOnLawn
Atomsmashasaurus Dex
Posts: 818
Joined: 11 Mar 2005 12:44
Location: Grass Valley, California

Post by ShredOnLawn »

You don't want lead powder in your eye when the time comes.

Stick to Aquarium Sand. It's all natural cheap pebbles polished by the ocean and cleaned with fresh water so the fish can eat off it. It's rounded so it doesn't hurt the suede and doesn't break apart easily.

It's heavy and stalls perfectly.
Lon Smith
User avatar
Pete
Multidex Master
Posts: 294
Joined: 21 Jun 2005 18:42
Location: canada

Post by Pete »

RawSko wrote:A friend of mine told me that BB's are exactly that. Copper plated lead... I didn't know that
wrong.
i have some copper head premium bbbs and they are copper coated steel bbs. 4.5mm some might think these are big but they work perfectly in my bags.
hackeysnacker

Post by hackeysnacker »

copper plating leaves rust marks after washing and air drying a bag
User avatar
Jdigges
Flower Child
Posts: 1704
Joined: 04 Jan 2005 19:23
Location: Ballston Lake NY

Post by Jdigges »

i use size 7 lead shot. i only have enough for about two more bags, so im going to order some more none lead size 7 shot. i've had no problems with it leaking through my bleed holes
Josiah Digges


Embassy Footbag Crew
User avatar
Pete
Multidex Master
Posts: 294
Joined: 21 Jun 2005 18:42
Location: canada

Post by Pete »

hackeysnacker wrote:copper plating leaves rust marks after washing and air drying a bag
eh. i didnt have a single problem with my footbags. maybe you got a crappy brand of bbs? mine are great! and yes, the copper will fall off but not rust. what falls off is the copper, rusted copper is green. not orange. and the steel inside does not rust, i tried it in a bit of water for a few weeks. left it outside, etc...nothing. :wink:
User avatar
andr00
Multidex Master
Posts: 212
Joined: 23 Mar 2006 09:59

Post by andr00 »

is it possible to get less than 10 pounds anywhere? jeeze...i want to start stitching but idk if i need 10 pounds of filler just to start w/!!! iso filler thx
Andrew's f00t(blog)
Last Updated: 5-22-06
zilla wrote: It's like being a jedi and making your own lightsaber
mahhkohh
Flower Child
Posts: 1944
Joined: 22 Feb 2005 08:36
Location: near stuttgart,germany
Contact:

Post by mahhkohh »

see it that way: if you have 10 pound, then you wont ever have too worry about filler for... the next 2 years... if you keep up stiching that long, if not, sell it to another sticher. for a fair price, i´m sure they would highly apprichiate!
come get your mÃcrÖ¶ bag today
buy one of my bags and help finance my guitar lessons :)
mäcrö hartig
Slowsis
Circle Jerk
Posts: 2564
Joined: 11 Oct 2004 08:36
Location: Toronto, Canada

Post by Slowsis »

1 pound=453.6 Grams
10 pounds=4536 grams
average footbag 45-50 g

Thats about 100 footbags, and considering some people use mixed fill, maybe even more.
Adam Greenwood
Live>Love>Shred>Die
Toronto Blog
User avatar
Jdigges
Flower Child
Posts: 1704
Joined: 04 Jan 2005 19:23
Location: Ballston Lake NY

Post by Jdigges »

Andr00, you can get a 5lb bag of stell shot from ballistics.
Josiah Digges


Embassy Footbag Crew
Post Reply