abshire rippage, wtf!!!

Discuss your gear and stitching and shoe modification in here.
User avatar
hallucinogenious
Hack Fiend
Posts: 57
Joined: 04 Jan 2005 22:28

abshire rippage, wtf!!!

Post by hallucinogenious »

anyone elses abshire rip before even breaking in all the way? i got like 5 small holes in different places, and some panels are alot bigger than other ones, and i can see the stiching poping out in a couple of places, anyone else get abshires like this? i get the impression that it was made very quickly or something....
User avatar
footjoe
Atomsmashasaurus Dex
Posts: 796
Joined: 22 Apr 2004 17:56
Location: Chesterville, Maine

Post by footjoe »

how did you break it in? Sounds like its been through a lot of abbuse.
15 year old Joe Kulacz
User avatar
Leuch
BSOS Beast
Posts: 388
Joined: 11 Aug 2004 11:34
Location: Paris, France

Post by Leuch »

hmmm... Strange.. Do you pick up the bag with your hands?? This might explain the holes... At worlds, I've remarqued that almost all american players don't pick up the bags with the hands, but with the feet... This kills the bag... really
For the panels size, and the stitch, I can't help you.. 8)
Charles Dupuy
La mairie,
75 Adds - Paris
User avatar
zachatree
Happy Hippy Hoffa
Posts: 2026
Joined: 07 Jul 2004 11:59
Location: Pennsylvania
Contact:

Post by zachatree »

sounds like its been broken incorrectly, during break in you should finger the bag not stretch or twist, or roll, never pulm your bags. always use your fingers. breaking in a 32 pannle bag takes time so if u cant wait get a mr.sand with 32 pannles. i get the impression that you have no payshance. how long have u had it? holes come in time with every bag, but the way it sounds i dont think the holes are from time....
User avatar
Leuch
BSOS Beast
Posts: 388
Joined: 11 Aug 2004 11:34
Location: Paris, France

Post by Leuch »

zachatree wrote:holes come in time with every bag
Yeah, but holes come much faster with foot picking...
Charles Dupuy
La mairie,
75 Adds - Paris
User avatar
zachatree
Happy Hippy Hoffa
Posts: 2026
Joined: 07 Jul 2004 11:59
Location: Pennsylvania
Contact:

Post by zachatree »

Leuch wrote:
zachatree wrote:holes come in time with every bag
Yeah, but holes come much faster with foot picking...

^^^^ he isnt lieing
User avatar
Psyc
Hack Fiend
Posts: 53
Joined: 23 Dec 2004 15:21
Contact:

Post by Psyc »

Then how do you break in the bag? I squeeze it and roll it on my thigh. Is that how it is properly broken in?
Pamela Ocampo
User avatar
Tsiangkun
Post Master General
Posts: 2855
Joined: 23 Feb 2003 02:27
Location: Oaktown

Post by Tsiangkun »

If you have holes in the fabric before it was broken in, and stiches are showing, and the panels are distorting to different sizes . .. sounds like a classic case of abusing the bag.

I think most people learn about the fickle nature of facile this way.
LittleBoy footbag
Official Streaker
Posts: 1013
Joined: 16 Nov 2004 18:04
Location: Kendall Park, NJ

Post by LittleBoy footbag »

there is a HUGE thread about footbag break-ins on this page. If you look, we have shitloads of tips and 'techniques' there. Not even rolling. some people take it to other parts like washing, mystical beads, ancient footbag gods....etc
User avatar
Psyc
Hack Fiend
Posts: 53
Joined: 23 Dec 2004 15:21
Contact:

Post by Psyc »

I've already read that post.. whoever said that those dryer sheets were good was wrong. I tried it on a 8 panel 'Franklin Suede Bag' and now the white panels are dirty looking.
Pamela Ocampo
LittleBoy footbag
Official Streaker
Posts: 1013
Joined: 16 Nov 2004 18:04
Location: Kendall Park, NJ

Post by LittleBoy footbag »

HOWEVER< ShredNJ is a footbag stitch master. He knows his bags and I's reccomend you to put your bags in a small jar, put some shampoo (LIke me, I put H&S for the extra volume....only my hairdresser knows for sure!) and get the bag wet and massage the soap into it. Then, I would throw the bag into the air spinning to shake off excess water AFTER all soap has been removed and massaged the bag. After that, I would get about 10 sheets of paper towels and put the bag into 2 of them, massage it to get he water out, massage the bag, replacetowels, new layer and do the same until your bag is just damp. Then, let air dry for a couple hours.
User avatar
Jas
Shredaholic
Posts: 182
Joined: 14 Jun 2004 22:24
Location: NSW, Australia
Contact:

Post by Jas »

ive got a hole starting to form on one panel after about 5months. Its fully broken in aswell. Its a bummer that theres a hole in it, but its not so big that beads can fall out of it yet. Anyone know wot to use to cover the hole up?
And stepping on the bag, putting heavy weights on it, scuffing it, rubbing the beads against the facile harshly will definately and easily put holes on the bag. Ive learnt that facile does get thinner as it ages and more prone to getting holes in it, so the best thing to do is to take care of the bag as much as possible in any way possible. Ive learnt how bags passed away by looking closely at the material and hole and the things ive done to it to cause it, my next bag will hopefully last a little bit longer...

Cheers
Jas
Jason Po
User avatar
blackcrown
Multidex Master
Posts: 316
Joined: 23 Apr 2003 13:09
Location: Santa Barbara, CA

Post by blackcrown »

http://www.horizonhobby.com/Shop/ByCate ... ID=PAAPT02

This is what I use for those little holes. I'll put a drop or two on the end of a toothpick then apply it to the hole. The bag will absorb the zap-a-gap and form hard little shell around the hole, this will prevent the hole from getting any bigger.

Also you can cut a little piece of band-aid and put it over the hole and that will work as a temp fix.

Eric
Eric Palmer
LittleBoy footbag
Official Streaker
Posts: 1013
Joined: 16 Nov 2004 18:04
Location: Kendall Park, NJ

Post by LittleBoy footbag »

or world footbag.com. The other goos thing they sell is freesole. I'd reccomend this stuff. It's really, really tough so it should be good used sparingly.
User avatar
Tsiangkun
Post Master General
Posts: 2855
Joined: 23 Feb 2003 02:27
Location: Oaktown

Post by Tsiangkun »

Or almost any dime store, get some silicone caulk.
User avatar
crazydwarf
Egyptian Footgod
Posts: 1257
Joined: 10 Jun 2004 18:27
Location: Bay Area, CA

Post by crazydwarf »

I used super glue once or twice and put it on with a pin... not sure if that's the best though, seemed to work ok
Dustin Rhodes
User avatar
hallucinogenious
Hack Fiend
Posts: 57
Joined: 04 Jan 2005 22:28

Post by hallucinogenious »

no i dont do "foot pick ups" im not a dumbass..... i havent even played with it for a week, but luckily i had someone here to sew it for me. i mostly broke it in by playing around with it in my hand and fingers.
User avatar
shreddaily
Flower Child
Posts: 1665
Joined: 03 Sep 2003 16:56

Post by shreddaily »

If you did break it in nicely the only thing to say is, some bags suck! Every sticker makes some crappers and thats the problem with ordering online. Richie has made TONS of good bags but also a few that die b4 they have served their good. Every other sticher out there falls in the same catigory. Better luck next time.
ericksonj
Atomsmashasaurus Dex
Posts: 809
Joined: 26 Jul 2003 04:02
Location: Eugene, OR

Post by ericksonj »

Yeah that sucks. Richie really rocks, and if you send it back to him he will fix it I'm sure. He of course does not intentionally make a shitty bag. The bag I bought from him is still my favorite bag.
Always Shreddin
James Erickson
Eugene Footbag Association (Orton, Nasty, Me)
w/ new additions (Casey, Alex, Eddie, and Shawnell)
richardabshire
Fearless
Posts: 606
Joined: 07 Nov 2003 19:27
Location: San Diego, California

Post by richardabshire »

I can fix it if you send it to me. Just pay for the shipping costs and I will take care of the rest. I hate to see any of my bags have a flaw. I know sometimes players put too mush force on the bag and that will destroy it, but sometimes it is a combination of a flaw and bad break in. Don't worry, I can take care of it if thats what you want. Hope this helps,Richie
Post Reply